Avonic CM-CON100 User Manual - Page 15

Browse online or download pdf User Manual for Security Camera Avonic CM-CON100. Avonic CM-CON100 16 pages. Ptz camera controller
Also for Avonic CM-CON100: User Manual (12 pages), User Manual (10 pages), User Manual (13 pages), User Manual (11 pages)

Print Page
Avonic CM-CON100 User Manual

9. Speed Setting

Speed Setting
-
-
-
Speed Setting sets the speed to which the camera will respond when you move the camera by using the
joystick. Move
to change the setting between Low, Middle and High. Press

10. Default Setup

Default Setup
-
Restores the Keyboard setting to factory Default.
1.
Move
to open the Default Setup.
2.
Move
to change between <YES> or NO.
3.
Press
to save the setting.

11. Information

Information
-
The information display shows the firmware version number. Move

OSD Menu

With the menu button next to the joystick, you can open the OSD menu of the camera to make changes in
the settings of the camera itself. If you are using an Avonic camera in combination with the CON100, you can
download our camera manual on our
using a third party camera, please refer to the manual or instruction of this third party camera.
Follow these instructions to navigate through the OSD menu:
1.
Press the Menu button to open the OSD Menu
2.
Move the joystick up and down
3.
Press OPEN to enter a menu feature
4.
Move the joystick left and right
5.
Press CLOSE or ESC to leave a menu feature or the OSD menu itself.
www.avonic.com
Low
Middle
High
<YES>
NO
VERSION
3
1
5
website
to read about the functionality of the OSD menu. If you are
to scroll through the menu
to change the settings within a menu feature
to save the setting.
to open the menu.
Back to top
15