Aqua One AQUIS 700 Instruction Manual - Page 8

Browse online or download pdf Instruction Manual for Pet Care Product Aqua One AQUIS 700. Aqua One AQUIS 700 17 pages. Canister filters

Print Page

Installation

1. Open both of the brown accessory boxes and

remove all components from there plastic bags.

You will find a set of taps and two pieces of

hose. Screw the collar on the taps all the way

in. (Clockwise) Fig 1

2. Now push one end of the hose over the hose

tail and thread. Push it on as far as possible. Fig

3. Now turn the collar anti clock wise to lock in

the hose. Do this on both pieces of hose.

4. Attach the taps to the inlet and outlet at the

top of the filter head. There is a sticker on each

tap and a label on the top of the unit which it

corresponds to. IN goes to IN & OUT to OUT.

Fig 3

5. Be sure not to cross thread the tap as this

may crack the seat and cause it to leak. Over

tightening the tap will have the same effect. NO

TOOLS ARE REQUIRED. HAND TIGHT IS

ENOUGH.

6. Place the canister in the desired position and

feed the hose through the cabinet or stand. Fig

Fig 1

7. Choose the outlet you wish to use and

assemble it. You will find you have 2 Walking

Sticks; the shorter one is generally used for the

outlet. However if you have a shallow aquarium

you can use the longer one.

8. Outlet option 1 is the Spray Bar, this can be

set up to run along the back or side wall of the

aquarium.

Fig 2

9. Attach a Joiner (b) on to the shorter side of

the Walking Stick (a), insert an Elbow (c) into

that. Then attach another Joiner (b) onto the

other end of the Elbow. (c) Insert the Spray Bar

(e) into the other end of the Joiner (b) . Press

together firmly. Attach Suction Cups (d) to the

Spray Bar.

Fig 3

1. Walking Stick (a)

4. Suction Cups (d)

2. Joiners (b)

5. Spray Bar (e)

3. Elbow (c)

Fig 4