Billet Specialties 13800 Installation Manual - Page 19

Browse online or download pdf Installation Manual for Engine Billet Specialties 13800. Billet Specialties 13800 20 pages. Small block chrysler

Print Page

Figure 16: Install Compressor Manifold

If you are going to be installing your air conditioning hoses and charging

the system at this time, remove the cover plate on top of the

compressor body.

A,B] Apply anti-seize to the two 8mm-1.25 x 25mm socket head cap

screws. Install compressor manifold onto compressor and thread the two

8mm socket head cap screws through the manifold and into the

compressor, tighten firmly (25 ft/lbs.)

Install hoses, connect clutch wire and charge system.

Important

If you are NOT installing hoses and charging the system at this time, place

the compressor manifold and hardware in a safe place and leave cover

plate on compressor.

Do not connect the clutch wire or apply power to clutch wire without the

hoses connected and the system charged – Serious damage will occur

to compressor.

Compressor Oil

Although the compressor is supplied with oil, the level may not be correct

for the entire system. Consult the instruction manual of the air

conditioning unit for proper levels and system charging procedure.