Avonic CM-CON100 User Manual - Page 10
Browse online or download pdf User Manual for Controller Avonic CM-CON100. Avonic CM-CON100 13 pages. Ptz camera controller
Also for Avonic CM-CON100: User Manual (12 pages), User Manual (10 pages), User Manual (11 pages), User Manual (16 pages)
Print Page
Operation Instructions
Menu
After powered on, "USER PIN" will show on the controller's screen. The initial pin is "111111".
Operation
Enter USER PIN
Pin Error：When"USER PIN：ERROR" shows on screen, it indicates wrong pin was input. Enter
correct pin to get to next step
Pin Correct：Screen shows" 1"camera icon and default camera number. If there is no operation,
after 5 seconds the screen will display the current time. If still no operations, the controller will
enter sleepmode (30sec, 1min, 5min, 10min, 30 min or 60 min.)
Enter menu
Menu List
Camera Setting
Camera ID
Protocol setting
Baud rate setting
Address Setting
Increment
www.avonic.eu
Button
Press SETUP key
10
Screen
USER PIN:
ADMIN PIN:
CAMERA SETTING
：
PROTOCOL：
PELCO D
BAUD RATE：
2400
ADDRESS: 1
INCREMENT:
Comment
The initial USER pin is
"111111"
See "PIN SETTING" to
set pin.
The initial ADMIN pin
is "111111"
See "PIN SETTING" to
set pin.
Move up / down the
joystick, choose
"CAMERA SETTING"
0-255, use num keys,
press ENT to confirm
PELCO D/PELCO P
/VISCA
2400/4800/9600 /
19200/38400
0-255
1-20