Aqua One Maxi 104 User Manual - Page 7

Browse online or download pdf User Manual for Pet Care Product Aqua One Maxi 104. Aqua One Maxi 104 12 pages. Maxi series powerhead

Aqua One Maxi 104 User Manual
Installation 101/102
All Aqua One Maxi Power Heads come fully
assembled and ready to use.
1. Decide which outlet option to use.
a) If no attachment is required simply install the
power head as is, or push the 13mm adapter
or 13-9mm reducer into pump outlet.
b) If the venturi is required, push venturi outlet
directly into pump outlet and hang the airline
outside the aquarium.
2. Suction cups will fasten the powerhead to
the wall of your aquarium.
3. Use flow adjuster on the bottom of the
powerhead:
+ will allow full flow
- will reduce the flow
Remember the more flow the better.
Fig 1
Maintenance 101/102
Clean the impeller at least once a month.
Refer to the "Know You Filter" page for help
with the following procedure.
1. Remove the power head from the aquarium
and take it to the sink.
Fig 2
2. Grasp the motor with one hand and mounting
bracket with the other and gently pull apart.
3. Remove the impeller cover to gain access
to the impeller.
4. Pull impeller from the motor and rinse
properly. Use an Aqua One double ended pipe
brush to clean the impeller and the impeller
well and also any of the outlet options that are
being used.
5. Put the power head back together and
return to the aquarium. Ensure your hand is
Fig 3
not wet, plug in at the power supply and turn
on.
7
Fig 4