Aqua One moray 3600 Manual - Page 8
Browse online or download pdf Manual for Pet Care Product Aqua One moray 3600. Aqua One moray 3600 12 pages. Aquarium pumps
Also for Aqua One moray 3600: User Manual (12 pages)
Installation: 360/480/1300
The 360, 480 or 1300 series Morays can be mounted in
2 different ways and used for a variety of applications.
All 3 models come with uplift pipe adapters enabling
them to be used as an alternative to air driven systems
on under gravel filters. Refer to the "know your pump"
section at the front of this instruction booklet for part
identification.
Attaching the hang bracket: 380/480 series
1. Remove the top motor cover and the strainer.
2. Remove the 4 suction cups.
3. Insert the hang mount into the 2 holes at the strainer
end of the motor
4. Place the top motor cover and the strainer (If being
used) back into position.
Attaching the hang bracket: 1300 series
1. Remove the strainer and slide the base plate
out towards the impeller.
2. Slide the hang mount into the groves at the
back of the pump.
3. Replace the strainer. (If being used)
They are also provided with multiple outlet options.
water level
1. Duckbill or multi directional outlet: allows the water
to be channelled a variety of different directions. Good
for providing water flow to static areas of the aquarium,
thus reducing waste build up.
2. Venturi: for injecting bubbles into the aquarium.
The venturi adjuster allows the water to air ratio to be
adjusted by the user.
3. A 19mm barbed hose tail is also provided with the
1300 series pump. This can be used for running devices
such as protein skimmers. 2300, 3600 and 4900 series
pumps are dedicated sump pumps. They are provided
with 19mm and 25m barbed hose tails. They can be
used for many other purposes such as running external
filtration devices or simply circulating water.
9
GB