Billi B-5000-XL User Manual - Page 3
Browse online or download pdf User Manual for Kitchen & Bath Fixtures Billi B-5000-XL. Billi B-5000-XL 16 pages.
Also for Billi B-5000-XL: User Manual (17 pages)
Print Page
User guide
Billi B-5000 – XL, XT, XR.
– Billi hose sets as supplied with the appliance
are to be used . Old or other manufacturer's
hose sets should not be re-used .
– If the appliance is located where the ambient
air temperature could fall below 4°C when
the heater is not in use, do not turn off the
power supply to the appliance . This
safeguard does not offer the same protection
to the connecting pipework
and fittings .
– The ambient temperatures this unit
should operate within are 5°C to 30°C .
– Turn off power to unit, by unplugging
the power cord from the power point,
if water supply is turned off
– The appliance is intended to be used in
household and similar applications such as:
• Staff kitchen areas in shops, offices
and other working environments
• Farm houses and by clients in hotels,
motels and other residential type
environments
• Bed and breakfast type environments
• Catering and similar non-retail
applications
– WARNING: When positioning the appliance,
ensure the supply cord is not trapped or
damaged.
– WARNING: Do not locate multiple portable
socket - outlets or portable power supplies at
the rear of the appliance.
Please note maximum water inlet pressure is
1MPa
Cupboard ventilation requirements
Your Billi B-5000 underbench module
requires minimal cupboard ventilation and
requires air space around the unit of 100mm .
Care should be taken when using the
cupboard space, to avoid stretching or
damaging plastic pipe work . Check fittings
and tubing at each filter change for signs of
damage or leakage . Always ensure access to
power switch and water supply tap is not
restricted .
Caution and safety
Boiling water is dangerous and can cause
severe burns, particularly with young children .
Boiling water must always be handled with
caution . Use this appliance only as directed
in these instructions and only for the purpose
for which it has been designed . Your Billi
B-5000 is designed to be safe and practical .
In an environment with young children,
it is recommended that the boiling water
safety switch is activated .
The following safety features have been
included:
– Ergonomic levers
– Levers/touch activations located safely
above water outlet .
– Smooth electronically controlled boiling
water flow rate . Flow is briefly reduced as
water first enters cup to prevent splashing .
– Dispenser remains cool to touch .
– Childproof safety switch .
– Boiling water Safety Isolation mode .
General Maintenance
Your Billi B-5000 has been designed to require
minimal maintenance other than replacement
of filter cartridges . During each filter change,
check all water connection fittings for signs
of leakage . Check all tubing for any signs of
damage . Check the cupboard area around the
base of unit for any signs of moisture . Ensure
side vents of the under bench module are kept
clear and airflow is not obstructed . Restricted
airflow will cause inefficient operation of the
refrigeration system .
—Cleaning the dispenser
Your Billi B-5000 Dispenser is fabricated from
solid zinc casting material with tough
protective chrome plating . Proper care of the
Billi Electronic dispenser crucial; Avoid using
abrasive cleaners . Wipe clean using a damp
cloth . Use of a non-solvent, non-smearing
cleaner such as Windex is recommended .
Do not pour water over dispenser .
3