AvonSynth AVS-VCO-1 User Manual

Browse online or download pdf User Manual for Music Equipment AvonSynth AVS-VCO-1. AvonSynth AVS-VCO-1 4 pages. Voltage controlled oscillator

Print Page
The
User Guide
Thank you for purchasing from AvonSynth
Congratulations on your purchase of a brand new AvonSynth AVS-VCO-1
Congratulations on your purchase of a brand new AvonSynth AVS-VCO-1
Voltage Controlled Oscillator Eurorack Module. We trust that it will both
Voltage Controlled Oscillator Eurorack Module. We trust that it will both
serve and inspire you as you create beautiful music with it for years to come.
serve and inspire you as you create beautiful music with it for years to come.
In order to get the most out of your module, please ensure that you read
In order to get the most out of your module, please ensure that you read
this User Guide in its entirety so that you fully understand all of its
this User Guide in its entirety so that you fully understand all of its
functionality, and that you follow all necessary safety directions during use.
Included in the Box
1 x VCO Module
Installation
Step 1: Power your system off. Place the module in your Eurorack-
Step 1: Power your system off. Place the module in your Eurorack-
compatible rack in any convenient position. Affix the module to your
compatible rack in any convenient position. Affix the module to your
rails using the included mounting screws and nylon washers.
rails using the included mounting screws and nylon washers.
Neglecting to use these washers may result in unnecessary marking
Neglecting to use these washers may result in unnecessary marking
of the unit.
of the unit.
Step 2: Triple check the polarity of the power connector before
Step 2: Triple check the polarity of the power connector before
connecting the power cord to your power supply. Ensure that the -12v
connecting the power cord to your power supply. Ensure that the -12v
line marked on the back of the module connects to the same end of
line marked on the back of the module connects to the same end of
the flat-cable that also connects to the -12v line on your power supply.
the flat-cable that also connects to the -12v line on your power supply.
While AvonSynth modules use shrouded connectors that make this
While AvonSynth modules use shrouded connectors that make this
process safer and more reliable, some systems do not conform to this
process safer and more reliable, some systems do not conform to this
polarity standard, so careful checking is always necessary.
polarity standard, so careful checking is always necessary.
Connecting the module with incorrect polarity can result in damage
Connecting the module with incorrect polarity can result in damage
done to the module which cannot be covered by warranty.
done to the module which cannot be covered by warranty.
Step 3: Power up your system and start patching!
www.AvonSynth.com
1 x 10 pin to 16 pin
flat-cable power cord
AVS-VCO-1
Voltage
Controlled
Oscillator
4 x M3 Mounting Screws
4 x Nylon Washers
Page 1 of 4