Avov Vixo 2 User Manual - Page 6

Browse online or download pdf User Manual for Set-top boxes Avov Vixo 2. Avov Vixo 2 12 pages.

Print Page

SETTInG Up ThE

VIXO 2

To set up the VIXO 2 simply plug in the HDMI cable into the TV Out (at the back of the box)

and the connect the other end to your TV or Receiver. Then just plug in the power plug and

the box is ready to go.

When turning on the VIXO 2 with the remote, please wait a bit after your button press to let

the box boot up. It does not display anything until the connection between the box and the TV

is established along with any processes it must perform to correctly boot. When plugging the

box in, the full boot time could take anywhere up to 30+ seconds.

When your VIXO 2 finishes loading for the first time you will see a menu with the Wifi, Language,

Display, and Time buttons. You can configure the individual properties but most importantly you

must set up the wifi if you are not using an ethernet connection. After you are done it will proceed

to take you to the main menu. If you accidently made a mistake in the setup or wish to edit it later,

you can find these four options as the first four buttons in the settings menu.