AVPro Edge AC-CX42-AUHD Quick Start Manual - Page 3

Browse online or download pdf Quick Start Manual for Switch AVPro Edge AC-CX42-AUHD. AVPro Edge AC-CX42-AUHD 7 pages.

Print Page

Web interface Continued

Use this area to route inputs to outputs

Video Scaler Mode:

This will set the scaler mode for HDBT output, the options are

•BP = Bypass - Scaler is disabled (Default)

•4K-2K = 1080P - If incoming signal is 4K, it will be downscaled to 1080P or 1900x1200

depending on the input format.

Audio Status:

Enable or Disable extracted Audio, the options are:

•ON = Extracted audio ports are ON (Default)

•OFF= Extracted audio ports are muted.

Audio Binding:

Bind the audio to a specific OUTPUT. The audio will always follow one output, this

means the audio switches with the video of the output you designate, the options are:

•output 1 = Extracted audio will follow HDBT OUTPUT (Default)

•OUtput 2 = Extracted audio will follow OUTPUT 2

Test Pattern:

Generate a 1080p test pattern to a specific OUTPUT.

•OUT1 = Generate a test pattern on HDBT OUTPUT

•OUT 2= Generate a test pattern on HDMI OUTPUT