DFI EC900-8MM User Manual - Page 15

Browse online or download pdf User Manual for Computer Hardware DFI EC900-8MM. DFI EC900-8MM 15 pages. Nxp i.mx8m mini processor ruggedized fanless embedded system
Also for DFI EC900-8MM: Quick Installation Manual (16 pages)

Print Page

X Installing an Antenna

Before installing the antenna, please make sure that the following safety cautions are

wellattended.

1. Make sure the PC and all other peripheral devices connected to it has been

powered down.

2. Disconnect all power cords and cables.

Step 1:

There are antenna holes reserved on the right side of the system and by default cov-

ered by rubber plugs. Please remove the plug prior to installing an antenna.

Step 2:

Connect the internal cable to the board's antenna connector, screw the antenna con-

nector through the antenna hole with washers and nuts, and screw on the antenna as

illustrated below.

Module Connector

Cable

Antenna Connector

User's Manual | EC900-8MM / EC910-8MM

Antenna

Chassis Wall

Washer

Nut

X Mounting Options

The system features DIN-rail mount chassis that facilitates fast installation of the EC900-

8MM/EC910-8MM to a DIN rail.

The DIN Rail mount kit includes the following:

• Din-rail mount bracket

• 2 screws

Step 1:

Use the provided mounting screws to attach the din-rail mount bracket to the top side of

the system.

Step 2:

Install the sytem onto the rail.

Chapter 3

HARDWARE INSTALLATION