DFI EC500-ADS Quick Installation Manual - Page 6

Browse online or download pdf Quick Installation Manual for Industrial PC DFI EC500-ADS. DFI EC500-ADS 13 pages. Modular-designed embedded system

Print Page

Installing an Antenna

Before installing the antenna, please make sure that the following safety cautions are

wellattended.

1. Make sure the PC and all other peripheral devices connected to it has been

powered down.

2. Disconnect all power cords and cables.

Step 1:

There are antenna holes reserved on the front side of the system and covered by rubber

plugs. Please remove the plug prior to installing an antenna.

Step 2:

Connect the internal cable to the board's antenna connector, screw the antenna connector

through the antenna hole with washers and nuts, and screw on the antenna as illustrated

below.

Module Connector

Quick Reference | EC500-ADS

Cable

Antenna Connector

Chassis Wall

Washer

Nut

Antenna