CPcam CP507 Quick Start - Page 2

Browse online or download pdf Quick Start for DVR CPcam CP507. CPcam CP507 4 pages. 16 / 8 ch mpeg-4 network dvs

Print Page
2
2
Install HDD :
Install HDD :
Carefully following the steps to ensure correct installation.
*** Note: If you want to install two HDDs, please set one HDD to "Master
Mode" or "Single Mode", and the other one to "Slave Mode". ***
1)
Open the upper cover of the DVR and screw out the bracket.
2)
Screw HDD to the HDD bracket.
3)
Connect the HDD to power connector and IDE BUS
(make sure to align the HDD precisely to the pin connection).
4)
Close the upper cover of the DVR.
For detailed installation instructions, please refer to the user's manual.
3
3
Physical Connection :
Physical Connection :
For 16 channels
2