Abarqs L-10 Quick Start Manual - Page 3
Browse online or download pdf Quick Start Manual for Freezer Abarqs L-10. Abarqs L-10 6 pages.
EN
Thank you for purchasing our product.
Before using this unit, please read this manual in order to avoid improper handling and use of the device.
1. General safety
Danger: On boats: If the appliance is powered by the mains, ensure that the powder supply has a esidual current
circuit breaker.
Warning:
Do not operate the device if it is visibly damaged.
This device may only be repaired by qualified personnel.
Improper repairs can lead to considerable hazards.
Electrical devices are not toys.
Always keep and use the device out of the reach of children.
Children must be supervised to ensure that they do not play with the device.
If this device's power cable is damaged, it must be replaced by the manufacturer, customer service or a
similar qualified person in order to prevent safety hazards.
Caution: Disconnect the device from the mains
before cleaning and maintenance after use
Food may only be stored in its original packaging or in suitable containers.
Notice:
With the DC cable to a DC plug socket in the vehicle(e.g. cigarette lighter)
Or with the 230 V connection cable to the 230 V AC mains supply
Check that the voltage specification on the type plate corresponds to that of the energy supply.
The cooling device is not suitable for transporting caustic materials or materials containing solvents.
Never pull the plug out of the socket by the cable.
2. Operating the device safely
Danger: Do not touch exposed cables with your bare hands. This especially applies when operating the device
with an AC mains power supply. Before starting the device, ensure that the power supply line and the plug are
dry.
Notice:
Do not use electrical devices inside the cooler unless they are recommended by the manufacturer for the
purpose.
Do not place the device near naked flames or other heat sources(heaters, direct sunlight, gas ovens
etc.).
Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the heat that arises during operating does
not build up. Make sure that the device is sufficiently far away from walls and other objects so that the air
can circulate.
Ensure that the ventilation slots are not covered.
Do not fill the inner container with ice or fluid.
Never immerse the device in water.
Protect the device and the cable against heat and moisture.
Do not switch the cooler box directly from the cooling function to hearing function or vice versa. Before
each change of function, the cooler box should be turned off for 30 minutes.
Do not turn the cooler box upside down.
3