AVS Bugflector II Installation Instructions

Print Page

Bugflector

For proper installation and best possible fit, please read all instructions BEFORE you begin.

Important Safety Information

• CAUTION - Before driving, ensure that the hood shield is properly secured to vehicle.

• Do not use automatic "brush-style" car washes.

• Do not use cleaning solvents of any kind.

• Periodically check all components for tightness.

Contents

NOTE: Actual product may vary from illustration.

Tools Required

Preparation Before Painting / Installation

• A trial fit is recommended to ensure proper positioning and fit.

• Check fit of parts before painting as we will not accept the return of modified or painted parts.

• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.

Installation Steps

Raise hood and clean the leading edge thoroughly,

Installation Instructions

- Bugflector II

Hood shield

Clean Towel

Car Wash Supplies

NOTE: Actual application may vary slightly from illustrations.

and allow to dry.

- Carflector

- Chrome Hood Shield

Screw

x 6

Phillips

screwdriver

Test fit hood shield by centering it on the hood edge.

Note where the mounting holes in the hood shield flange

Page 1 of 2

I - Sheet Number BF119

Receptacle

Bump On

x 6

Grease Pencil

will be and mark with a grease pencil.

™