AVS Carflector Installation Instructions Manual - Page 2

Print Page

Installation Steps

Align hood shield holes with holes in hood.

Apply pressure to all flanges to ensure adhesion of tape.

•

Wash only with mild soap & dry with a clean cloth.

Congratulations!

You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost

pride in our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your

product is top quality in terms of fit, durability, finish and ease of installation.

™

Auto Ventshade

NOTE: Actual application may vary slightly from illustrations.

Lund International, Ventshade Accessories Division

655 Raco Drive, Lawrenceville, GA 30045

800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com

, the Auto Ventshade

logo, Chromeflector

Assemble fastener by threading screw into receptacle.

Insert (1) fastener and screw until snug. Repeat for

DO NOT OVER TIGHTEN

Close hood and Install bump ons at pre-cleaned loca-

tions on the painted hood/fender surface.

, and the AVS

logo are trademarks of Lund International, Inc.

Page 2 of 2

remaining (3) fasteners.

hood

fastener

tape

hood

shield