AVS 3000 Quick Manual - Page 2

Browse online or download pdf Quick Manual for Car Alarm AVS 3000. AVS 3000 4 pages. Alarm/immobiliser

Print Page

ARMING THE ALARM:

When the alarm is in a disarmed state (LED not flashing) push button one to

arm the alarm. The siren will chirp and flash indicators once.

The LED light will turn on solid for ten seconds then start flashing. If a door,

bonnet or boot is opened or if the shock sensor detects an impact to the

vehicle the alarm will sound.

ERROR REPORT:

If any the any of the doors are open when you arm the alarm, the system will

warn you by chirping after 4 seconds.

DISARMING THE ALARM:

When alarm is armed (LED flashing), push button one to disarm. The alarm

will chirp twice and flash indicators twice.

AUTO ARM:

The AVS3000 has the ability to automatically arm 30 seconds after the ignition

is switched off and the last door is closed. See your installer if you would like

this option turned on. THIS FEATURE CANNOT LOCK THE DOORS

AUTO RE-ARM:

The AVS 3000 will automatically re-arm itself and re-lock the doors if the

system is disarmed and a door not opened within 60 seconds. This function

prevents the accidental disarming of the alarm system.

SHOCK SENSOR:

The shock sensor is designed to detect impacts to the vehicle. If the shock

sensor detects an impact the alarm will trigger.

EMERGENCY OVER-RIDE:

In the event that you lose or damage your remote controls the alarm can be

disarmed by via the ignition switch.

Emergency Over-ride Procedure:

1. Open the door the alarm will trigger and the siren will sound.

2. Enter the car and close the door.

3. Turn ignition from ACC to OFF 10 times and leave in the OFF position.

4. Wait 5 seconds, if the code is correct the siren will stop and the alarm will

enter disarmed mode. If the alarm does not stop, the code was entered

incorrectly. Start again from 1.