AVS RXPRO Installation Manual - Page 8

Browse online or download pdf Installation Manual for Car Alarm AVS RXPRO. AVS RXPRO 10 pages. 4-channel controller

Print Page

ADDING WIRELESS DEVICES

(wireless PIR, reed switch, smoke detector, emergency pendant)

Enter programming mode (see page 3)

Press button 3 repeatedly until the channels lights indicate the

output channel you wish to program.

Select the channel that you wish to be activated by the

detector.

Press button 2 repeatedly until the feature lights are on as

shown.

Press button 1 to set the feature light(s) to not flashing.

Note: By default the feature light(s) will be flashing, if not do

not press button 1.

Press button 2 repeatedly until the feature lights are off as

shown.

Press and hold button 1 until the channel light(s) begin to flash.

Now trigger the new detector; the channel light(s) should stop

flashing.

Note: detectors are high-powered and should be triggered at

least 5 metres away from the unit.

Press and hold button 2 on the remote control until the lights

start scrolling - The detector has now been learnt in.

Note: if using a wireless reed switch also follow Reed Mode

Enable on the next page.

Page 8