Allied Telesis CentreCOM GS980M/52PS Quick Installation Manual - Page 9
Browse online or download pdf Quick Installation Manual for Switch Allied Telesis CentreCOM GS980M/52PS. Allied Telesis CentreCOM GS980M/52PS 20 pages. Gigabit ethernet switches
Print Page
Installing the Switch on a Wall
You can install the switch on a wall with the front panel facing left or
right, as shown in the next figure. Do not install it with the front panel
facing up or down.
Here are the required tools and material for installing the switch on a
wall:
Four wall/equipment rack brackets and sixteen screws (included
with the switch)
Four wood or concrete wall screws (included with the switch)
Four wall anchors (included with the switch)
Cross-head screwdriver (not provided)
Flat-head screwdriver (not provided)
Stud finder for a wooden wall, capable of identifying the middle of
wall studs and hot electrical wiring (not provided)
Drill and 1/4" carbide drill bit for a concrete wall (not provided)
Warning: The device should be installed on the wall by a
qualified building contractor. Serious injury to yourself or
others or damage to the equipment may result if it is not
properly fastened to the wall. E105
Caution: The supplied screws and anchors might not be
suitable for all walls. A qualified building contractor
should determine the hardware requirements of your wall
before installing the switch.
CentreCOM GS980M Series Quick Installation Guide
E88
9