DFRobot DFPLayer Mini Manual - Page 12
Browse online or download pdf Manual for Control Unit DFRobot DFPLayer Mini. DFRobot DFPLayer Mini 13 pages.
Print Page
DFPLayer Mini
6、Note*
Item
Description
VIL
Low-Level Input Voltage
VIH
High-Level Input Voltage
Item
Description
VOL
Low-Level Output Voltage
VOH
High-Level Output Voltage
1. The module's external interfaces are 3.3V TTL level, so please note the level conversion during the
hardware circuit design, also in strong interference environment, electromagnetic compatibility note some
protective measures, GPIO using opt coupler isolation, increasing TVS etc.
2, ADKEY key values are in accordance with the general use of the environment, if the strong inductive or
capacitive load environment, please note that the module power supply is recommended to use a separate
isolated power supply, another matched beads and inductors for power filtering, we must ensure that the
input power as much as possible the stability and clean. If you really can not be guaranteed, please contact
us to reduce the number of keys to redefine wider voltage distribution.
3. For general Serial communication, please pay attention to level conversion. If strong interference
environment, or long distance RS485 applications, then please note that signal isolation, in strict
accordance with industry standard design communication circuits.
I/O Input Specification
Min
Type
-0.3
-
0.7VDD
-
I/O Output Specification
Min
Type
-
-
2.7
-
Max
Unit
Test Condition
0.3*VDD
V
VDD+0.3
V
Max
Unit
Test Condition
0.33
V
-
V
VDD=3.3V
VDD=3.3V
VDD=3.3V
VDD=3.3V