Allied Telesis SB251-01 Specification - Page 3

Browse online or download pdf Specification for Switch Allied Telesis SB251-01. Allied Telesis SB251-01 4 pages. Allied telesis series switches data specification

Print Page

Patch SB251-01 For SwitchBlade 4000 Series Switches and AT-9800 Series Switches

Patch SB251-01 for Software Release 2.5.1

C613-10361-00 REV A

•

The number of user-specified protocols in the PROTOCOL parameter

has been increased from three to seven.

•

The minimum value of the IPXDADDRESS parameter has been

decreased from 10000000 to 00000001.

PCR: 03006

Module: SWI

An issue which sometimes resulted in a broadcast storm within the internal

ports on the SwitchBlade, a reduction in bandwidth, and a loss of pinging

has been resolved.

PCR: 3008

Module: SWI

An issue which caused pings to fail when a control card was inserted in the

left hand slot to act as a slave, has been resolved.

PCR: 03014

Module: IPG, SWI

Support has been added to allow for multicasting to any number of

overlapping VLANs up to the maximum number of multicast forwarding

entries.

PCR: 03018

Module: SWI

An issue with pings failing after network host routes disappeared from the

switch due to an IP hashing error has been resolved.

PCR: 03020

Module: SWI

An issue with an interrupt occuring when waiting on the MDIO which

caused the MDIO to read or write incorrect information has been resolved.

PCR: 03021

Module: SWI

Ping would sometimes not work correctly after a 48 line card was extracted,

and after a restart reboot. This issue has been resolved.

Availability

Patches can be downloaded from the Software Updates area of the Allied

Telesyn web site at www.alliedtelesyn.co.nz/support/updates/patches.html. A

licence or password is not required to use a patch.

Network affecting: No