DG NVMeG4-IP Instructions Manual - Page 13

Browse online or download pdf Instructions Manual for Motherboard DG NVMeG4-IP. DG NVMeG4-IP 16 pages. Nvme ip with pcie gen4 soft ip

Print Page

dg_nvmeg4ip_instruction_xilinx_en.doc

3.4

SMART Command

Select '3' to send SMART command to NVMe SSD.

After finishing the operation, SMART/Health Information (output from SMART command) is

be displayed as shown in Figure 3-8. The console shows six parameters, described as

follows.

1) Temperature in °C unit.

2) Total Data Read decoded as GB/TB unit. Additionally, raw data without decoding is

displayed in 128-bit hexadecimal unit. The unit size of raw data is 512,000 Byte.

3) Total Data Written decoded as GB/TB unit. Additionally, raw data without decoding is

displayed in 128-bit hexadecimal unit. The unit size of raw data is 512,000 Byte.

4) Power On Cycles: Display the number of power cycles.

5) Power On Hours: Display the period of time in hours to show how long the SSD has been

powered on.

6) Unsafe Shutdowns: Display the number of unsafe shutdowns of SSD

20-Apr-20

Figure 3-8 Test result when running SMART command

Page 13