Allied Telesis Switchblade AT-x900-12 Software Configuration Manual

Browse online or download pdf Software Configuration Manual for Switch Allied Telesis Switchblade AT-x900-12. Allied Telesis Switchblade AT-x900-12 16 pages. Alliedware plus os

Print Page

Allied Telesis Switchblade AT-x900-12 Software Configuration Manual

AlliedWare Plus

How To |

Configure QoS on x900-24, x900-12, and

SwitchBlade x908 Series Switches

Introduction

This document describes some generic configuration examples for Quality of Service (QoS)

on the AlliedWare Plus OS.

What information will you find in this document?

This document provides information in the following sections:

•

1. Setting the egress rate‚ on page 2

•

2. Setting the priority on a packet‚ on page 7

•

3. Setting the egress queues‚ on page 10

•

Full QoS scenario - tiered services for a single customer‚ on page 13

Which product and software version does this information apply to?

This How To Note applies to the following Allied Telesis switches, running the

AlliedWare Plus OS software version 5.2.1 or later:

•

SwitchBlade x908

•

x900 series

C613-16112-00 REV A