Avsl 952.716UK User Manual - Page 2

Browse online or download pdf User Manual for Speakers Avsl 952.716UK. Avsl 952.716UK 4 pages. 100v indoor speakers

Print Page

Connection

BCV-series speakers are connected via 2 spring terminals at the rear of the

enclosure. For 100V operation, use double insulated cable rated to the total

maximum current, calculated as total max tapped power divided by 100V.

With the amplifier switched off, strip the speaker wire ends and connect

100V or "+" wire to the red terminal and connect Common or "-" to the

black terminal. Each model has a 100V transformer built in with various

volume settings or "tappings" available via a rotary switch at the rear

(BC6V example shown).

When used with a 100V line amplifier, select the required maximum

wattage that the speaker should demand from the amplifier. Ensure that

the sum of the wattages of all the speakers attached to the amplifier does

not exceed the recommended output of the amplifier.

When used with a standard (non-100V) amplifier, select the "8 Ω " setting and refer to the amplifier

manufacturer's manual to ensure that total speaker impedance ( Ω) is not less than recommended for the

amplifier. It is imperative that the amplifier does not deliver more power than can be handled by the BCV

speaker. Refer to the amplifier manual and specifications below to calculate this. Normally, it is

recommended that the amplifier is capable of the RMS power rating of the speaker but cannot ever

exceed the Max power rating.

Specifications

Model

BC3V

Woofer

75mmØ (3")

Tweeter

50mmØ (2")

Freq response

120Hz - 20kHz

Power max : 8Ω

60W

Power rms : 8Ω

30W

Tappings

1.5/3/6W, 8Ω

Dimensions (mm)

106 x 153 x 106

Weight

900g

SPL @ 1W/1m

88dB

Caution

The BCV-series speakers are intended for indoor use. Avoid moist or dusty environments.

Avoid excess heat and exposure to direct sunlight.

Take care not to overload speakers. HF drivers are especially prone to damage through overload.

For 100V installation, take proper care to insulate any contacts within reach of users.

BC4V

BC5V

100mmØ (4")

130mmØ (5.25")

25mmØ (1")

110Hz - 20kHz

100Hz - 20kHz

70W

90W

35W

45W

2.5/5/10/20W, 8Ω

5/10/20/30W, 8Ω

150 x 195 x 150

180 x 240 x 180

1.63kg

2.38kg

88dB

BC6V

165mmØ (6.5")

25mmØ (1")

90Hz - 20kHz

120W

60W

5/10/20/40W, 8Ω

220 x 280 x 220

3.08kg

89dB

BCV-series User Manual