Allied Telesis TurboStack AT-TSA5 User Manual - Page 9

Browse online or download pdf User Manual for Switch Allied Telesis TurboStack AT-TSA5. Allied Telesis TurboStack AT-TSA5 18 pages. At-tsax appliqués

Print Page

TurboStack™ Hub Appliqués

This manual describes the hub appliqué options and installation procedures for

ATI's TurboStack™ hubs. For information on the software installation and

network management aspects of TurboStack hubs, see the separate TurboStack

Manageable Hub Installation Manual and TurboStack AT-S10 Operations

Manual. These publications are shipped with each manageable hub.

In a TurboStack department concentrator chassis, manageable hubs can be

connected to network zones using different cable media by installing different

appliqués or external transceivers.

Note

This manual refers to two or more chassis-mounted hubs, at least one of which is

manageable, as a department concentrator. The term hub refers to either a

standalone hubs (i.e., a single manageable device) or a department concentrator

configuration.

The appliqué port on all TurboStack hubs with management are pre-conﬁgured

with the AUI appliqué. You can conﬁgure the AUI network port to another media

type by using an external transceiver. Table 1 shows the ATI micro transceivers

available for this purpose.

Model

Description

AT-MX40F/ST

Fiber Optic (10BASE-FL), ST Connector

AT-MX50F/SM

Fiber Optic (10BASE-FL), SMA Connector

AT-MX55F/SC

Fiber Optic (10BASE-FL), SC Connector

AT-210T/210TS/MX20T

UTP (10BASE-T), RJ45 Connector

AT-MX10/MX10S

Thin Ethernet (10BASE2), BNC Connector