Avsl Chord CAL63PK User Manual

Browse online or download pdf User Manual for Musical Instrument Amplifier Avsl Chord CAL63PK. Avsl Chord CAL63PK 2 pages. 10w guitar amplifier
Also for Avsl Chord CAL63PK: User Manual (2 pages)

Print Page

Layout

Guitar input

Gain control

Drive switch

Master volume control

Setting up and operation



Your CAL63 guitar is supplied with a guitar lead with a 6.3mm jack on each end



Plug one end into the guitar jack socket and the other end into the guitar input on the amplifier (1)



The guitar amplifier is supplied with IEC lead(s) for connecting to the mains



Connect the IEC at the rear of the amplifier and the mains plug to an appropriate mains outlet



Turn Gain (2) and Master volume (4) fully down with the Drive switch (3) in the out position (Clean)



Set Treble and Bass controls (5, 6) to the 12 o'clock position (pointing upward)



Switch the power on (8) and turn Gain (2) up halfway



Play the guitar with volume and tone controls turned fully up and gradually increase Master volume



Experiment with higher and lower Gain settings compared with Master volume settings



The tone of the guitar can be changed by adjusting the Bass and Treble controls (5, 6)



Pressing in the Drive switch (3) will give overdrive or distortion to the guitar signal



Adjusting the Gain control will vary the amount of this effect



If silent practice is preferred, plug headphones in via the 6.3mm socket, which will mute the speaker



After use, turn down Master volume and switch off power. Unplug from mains when not in use for long periods

Specifications

Power supply

Output power

Dimensions

Weight

230Vac, 50Hz (IEC) 18W

10Wrms

250 x 240 x 125mm

2.9kg

10W GUITAR AMPLIFIER

Treble control

Bass control

Headphones output

Power switch

CAL63PK

User Manual

Errors and omissions excepted.