Avsl Starwash Instruction Manual - Page 5

Browse online or download pdf Instruction Manual for DJ Equipment Avsl Starwash. Avsl Starwash 6 pages. Multicolour wash effects with green & red star cluster laser

Print Page

8 Channel DMX control

Channel

DMX

0-255

1-255

0-50

51-100

101-150

151-200

201-250

251-255

0-5

6-49

50-99

100-149

150-199

200-255

DMX address setting

When controlling the unit (or units) with a DMX controller, each one must be set with a specific DMX address. You can choose to set

all units with the same DMX address or you can set every unit with its own DMX address. If all units are set with the same DMX

address all units will be synchronised and operate in the same way, you cannot control each unit separately. If you set each unit with

a different DMX address, they will receive the DMX signal from their own DMX address. You will now be able to control each unit

individually. The DMX address that you set for each unit must be determined by the number of channels. This unit has 8 channels,

therefore you should set the starting address of the first unit to 1, the second unit must then be set to 9 (8+1), the third unit must be

set to 17 (9+8) and so on.

Troubleshooting

Problem

Check list

No output -

1. Check if the power cord is connected to the input

the unit does not

mains socket of the unit.

appear to work

Lights are

1. Check if the power cord is connected to the input

dimmed

mains socket of the unit.

1. Check that the cable is not damaged.

2. Check the polarity of the pin connections is correct.

No DMX input

3. Check lf the unit is in DMX mode.

4. Check if 2 units are set as Master units in a chain.

Function

Master dimmer

Red dimming

Green dimming

Blue dimming

Red, Green and Blue LED's on

Colour change from slow to fast

Off

Colour flash from slow to fast

Manual mode. DMX Channels 1-6 available

Choose colour

7 colour gradual change from slow to fast

7 colour pulse change from slow to fast

7 colour jump change slow to fast

Sound mode

Laser off

Auto mode

Red laser on

Green laser on

Red and green laser on

Red and green laser change automatically

Troubleshooting

1. Make sure there is mains present to the cable,

check the fuse or replace the cable.

1. Make sure the mains input voltage is the

correct voltage.

1. Change the DMX cable.

2. Correct the DMX polarity or change the cable.

3. Set up the function mode as DMX.

4. Set all other units as Slave units in the chain.