CPRO NBT5-22-RZ User Manual - Page 3
Browse online or download pdf User Manual for Security Camera CPRO NBT5-22-RZ. CPRO NBT5-22-RZ 12 pages. 2m hd ip fixed bullet camera
Print Page
Safety Instruction
These instruc�ons are intended to ensure that the user can use the product correctly to avoid danger or property loss.
If the product is not func�oning properly or damaged, contact the service center or purchasing office.
Warnings
Serious injury or death may be caused
if any of these warnings are neglected.
POWER
1.
Use only standardized adapters wri�en in the manual.
Incorrect connec�on of the power source can cause fire,
electric shock, or failure.
2.
If there is smoke or a strange smell from the power
source, disconnect the power immediately and contact
the service center or purchasing office. If you con�nue to
use it as it is, it can cause fire and electric shock.
3.
Disconnect the power plug from the outlet before
connec�ng to the power terminal block.
INSTALLATION
1.
Install it according to the temperature and humidity environment
suitable for the product specifica�ons. Otherwise, it can cause
fire and electric shock.
2.
Thunder and lightning can cause problems with the camera.
When installing, be careful to minimize damage caused by
lightning such as grounding.
3.
Do not place conduc�ve materials (drivers, coins, metal
s�cks, etc.) and water-filled containers on the camera. It
causes injuries caused by fire, electric shock, and falling.
4.
If you want to move the installed product, turn off the
power and move it or reinstall it. Otherwise, it can cause
fire and electric shock.
5.
Do not install it in places where there is a lot of moisture,
dust, soot, etc. It causes fire and electric shock.
6.
Avoid places where direct sunlight comes in or where heat
comes out, such as hea�ng appliances. It causes fire and electric
shock.
CLEANING
1.
Do not spray water directly on each part of the product
when cleaning. It causes fire and electric shock.
Cautions
Injury or equipment damage may be caused
if any of these cautions are eglected.
POWER
1.
Use the power line a�er fixing it firmly to the power connec�on
terminal. Incomplete connec�on can cause a fire.
2.
Do not extend the adapter output cable. If you need to
install the power cable extension, please contact the
service center.
3.
Use insulated power for PoE connected external power.
INSTALLATION
1.
It is recommended not to touch the lens when installing
the product as the factory ships with a focus adjustment
completed during the manufacturing comple�on
inspec�on phase.
2.
Avoid installing cameras facing bright lights like sunlight.
Causes damage to the image sensor.
3.
Make sure it safe and securely when installing camera on
the wall or ceilling. This can cause injury by the fall.
4.
Do not connect mul�ple cameras to one adapter. Excess
capacity causes abnormal heat and fire.
5.
Wear protec�ve gloves when installing/uninstalling the
camera. This causes burns caused by high temperature
on the surface of the product.
6.
Don't drop or shock the product. Please stay away from
places where vibra�on is severe or magnet types are
present.
7.
Install it in a well-ven�lated place. This can cause fire and
failure.
CLEANING
1.
Wipe the contaminated surface with a clean, so�, dry
cloth or wet the so�, dry cloth to prevent water from
flowing, then wipe the contaminated area.
3