Allied Telesis AR410 Quick Install Manual - Page 4
Browse online or download pdf Quick Install Manual for Network Router Allied Telesis AR410. Allied Telesis AR410 8 pages. Ar400 series
Also for Allied Telesis AR410: Quick Install Manual (12 pages)
Print Page
4
Selecting a Site
The router should be installed on a level surface such as a desktop or bench.
When installing the router, choose a site that:
■
Allows adequate airflow around the router and its vents.
■
Is free of dust and moisture.
■
Will allow the router to operate within a temperature range of 0 to 40º C
(32 to 104º F) and a humidity range of 5 to 95% non-condensing.
■
Has a reliable and earthed (grounded), preferably dedicated and filtered
power supply circuit.
■
Does not expose cabling to sources of electrical noise, such as radios,
transmitters, broadband amplifiers, power lines, electric motors, and
fluorescent fixtures.
■
Allows easy access to the router's power and cable connections.
Installing the Router
This equipment must be earthed.
Follow these steps to install the router:
1.
Read the safety information.
For safety information, see the Safety and Statutory Information booklet. A
copy of this booklet is supplied with each router, and can also be found on
the Documentation and Tools CD-ROM or at www.alliedtelesyn.co.nz/
support/ar400.
2.
Gather additional items you will need.
If also installing an optional Port Interface Card (PIC), you will need a PIC
Quick Install guide.
3.
Unpack the router.
Verify the package contents. If any items are damaged or missing, contact
your sales representative.
4.
Place the router in its operating location.
See the previous Selecting a Site section for guidelines on choosing a
suitable location.
5.
Install expansion options.
If you purchased an optional PIC, install it now by following the PIC Quick
Install Guide. That guide can be found on the Documentation and Tools
CD-ROM or can be downloaded from www.alliedtelesyn.co.nz/support/
ar400/.
AR400 Series Router
C613-04032-01 REV C