Avtech 960H User Manual - Page 2

Browse online or download pdf User Manual for Security Camera Avtech 960H. Avtech 960H 4 pages. 960h ultra resolution series

Print Page

MAJOR OPERATING CONTROL AND FUNCTIONS

1. Flange Back Adjusting Ring

It is suitable for CS-mount lens. When using C-mount lens, please use the CS-C conversion ring*.

2. Back Focal Lock Hexagonal Bolt

The camera is set at the standard back focal position. Fine-tuning is inevitable according to the lens types.

Adjust the lens back-focus by turning the focusing knob.

3. Auto Iris Lens Connector

Supplies power and controls signals to an Auto Iris Lens.

4. Power LED Indicator

The Power LED Indicator indicates normal status during operation.

5. Power Input Terminal

 For connecting to DC12V regulated power supply.

6. Video Output Connector (VIDEO OUT)

For connecting to CCTV monitor video input with coaxial cable.

7. V.D. / D.D. selectable

When using Auto Iris Lens, select Video Drive or Direct Drive depend on the type of lens you used.

8. Audio Output Connector (AUDIO OUT)

Connect to the AUDIO IN connector of the recording device.

9. OSD Menu Selection

For more details, please refer to "CAMERA PARAMETERS".

INSTALLATION

*** It is recommended to have the following installation done by the qualified service personnel or system

installer. ***

1. Mount a lens onto the camera (By turning it clockwise).

It is suitable for CS-mount lens.

But if the lens you chose is C-mount, please use the CS-C conversion ring* to connect the C-mount lens

and the camera.

2. Switch the lens selection depending on the lens you used.

* Auto iris lens:

V.D. / D.D.: Select VD or DD depend on the type of lens you used.

3. Connect the camera VIDEO output and the monitor video input with a 75Ω coaxial cable.

4. Connect the camera AUDIO output and the monitor audio input with a coaxial cable.

5. Connect the POWER terminal of the camera to a right power supply.

6. Adjust the focus or flange-back (Please refer to

* The CS-C conversion ring is not supplied in the sales package and needs to be purchased separately.

E for adjustment instructions).