DGS Real Life Ninja Starter Pack 1 Assembly Instructions Manual - Page 7

Browse online or download pdf Assembly Instructions Manual for Accessories DGS Real Life Ninja Starter Pack 1. DGS Real Life Ninja Starter Pack 1 8 pages.

Print Page
15
Stand Salmon Ladder upright and secure to
monkey bars using eight 2 1/4" bolts with
wooden lift support may be removed.
Lock Washer
Flat Washer
2 1/4" Bolts
x 8
on Each Bolt
16
Mounting Bracket should be on front face of pegboard.
Lift Pegboard into place and secure on Salmon Ladder end.
Secure on warped wall end using supplied bolts through
spacer block into pre-installed inserts in side of warped wall.
End of Pegboard
abuts back of Salmon
Ladder Upright
Salmon Ladder Side
6" Bolts
Flat Washer
Locking Nut
x 3
17
Check to make sure monkey bars and salmon
ladder are square and level. To anchor salmon
secure using supplied wedge
DGS - 17 Lucienne Ave. Danielson, CT 06239 - 800-932-3339 - [email protected]
Please visit gymsupply.com for product assembly videos.

Front View

Salmon Ladder Header
Pegboard
Mounting
Block
Mounting Bracket
bolts to Front of pegboard
and side of salmon ladder
Warped Wall Side
10" Bolts
Flat Washer
"
Locking Nut
CarriageBolts
Flat Washer
x 3
Locking Nut
x 3
Front of
Warped
Wall
and