Avtech KPC131D User Manual - Page 4

Browse online or download pdf User Manual for Security Camera Avtech KPC131D. Avtech KPC131D 4 pages. Regular camera series

Print Page

INSTALLATION

***The following installation is better accomplished by qualified service personnel or system installer.***

1. Mount a lens onto the camera (By turning it clockwise).

It is suitable for CS-mount lens.

But if the lens you chose is C-mount, please use the CS-C conversion ring* to connect the C-mount lens

and the camera.

2. Switch the lens selection depending on the lens you used.

* Manual iris lens or fixed lens:

AES: When using manual iris lens or fixed iris lens, set switch to AES.

* Auto iris lens:

AI: When using auto iris lens, set switch to AI.

V.D. / D.D.: When using Auto Iris Lens, select VD or DD depend on the type of lens you used.

3. Connect the camera VIDEO output and the monitor video input with a 75Ω coaxial cable.

4. Connect the camera AUDIO output and the monitor audio input with a coaxial cable.

5. Connect the POWER terminal of the camera to a right power supply.

6. Adjust the focus or flange-back (Please refer to

NOTE: Focus or Flange-Back Ring Adjustment

1. Mount the lens

by turning it clockwise on the lens mount of the camera.

2. Loosen the screws on the flange-back adjusting ring.

3. Turn the flange-back adjusting ring to the desired position.

4. Tighten the screws on the flange-back adjusting ring.

PRECAUTIONS

Do not install the camera in an environment where the humidity or temperature is high

Do not install the camera under the unstable lighting condition

Do not expose the camera to rain or moisture

Do not keep the camera face to strong light directly

Do not touch the front glass of the camera

Do not use other than specified power source

Do not disassemble the camera

* The CS-C conversion ring is not supplied in the sales package and needs to be purchased separately.

E for adjustment instructions).