Dell 6400 - Inspiron Laptop Service Manual - Page 25
Browse online or download pdf Service Manual for Laptop Dell 6400 - Inspiron Laptop. Dell 6400 - Inspiron Laptop 46 pages.
Back to Contents Page
Hard Drive
Dell™ Inspiron™ 6400/E1505 Service Manual
Removing the Hard Drive
Replacing the Hard Drive
Returning a Hard Drive to Dell
Removing the Hard Drive
CAUTION:
If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive.
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
computer.
NOTICE:
To prevent data loss, turn off your computer before removing the hard drive. Do not remove the hard drive while the computer is on, in
standby mode, or in hibernate mode.
NOTICE:
Hard drives are extremely fragile; even a slight bump can damage the drive.
NOTE:
Dell does not guarantee compatibility or provide support for hard drives from sources other than Dell.
1. Follow the instructions in
Before Working Inside Your
2. Turn the computer upside-down and remove the two M3 x 3-mm screws.
1
M3 x 3-mm screws (2)
NOTICE:
When the hard drive is not in the computer, store it in protective antistatic packaging. See "Protecting Against Electrostatic Discharge" in your
Product Information Guide.
3. Slide the hard drive out of the computer.
Replacing the Hard Drive
NOTICE:
Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the connector.
1. Slide the drive into the bay until it is fully seated.
2. Replace and tighten the screws.
3. If you have installed a replacement hard drive, reinstall the Microsoft® Windows® operating system. For instructions, see "Restoring Your Operating
System" in the Owner's Manual.
4. Reinstall drivers on the new hard drive. For instructions, see "Reinstalling Drivers and Utilities" in the Owner's Manual.
Computer.
2
hard drive
Before Working Inside Your
Computer) before working inside the