Dell Alienware Area-51m R2 Setup And Specifications - Page 4

Browse online or download pdf Setup And Specifications for Laptop Dell Alienware Area-51m R2. Dell Alienware Area-51m R2 21 pages.

Print Page

Set up your Alienware Area-51m R2

NOTE: The images in this document may differ from your computer depending on the configuration you ordered.

Connect one or both power adapters that are supplied with your computer, then press the power button.

NOTE: Your computer ships with two power adapters, and it operates normally with one power adapter connected. For

maximum gaming performance, it is recommended to connect two adapters. Only use adapters supplied with your device,

or Dell-approved adapters to power your device.

Alienware Graphics Amplifier enables you to connect an external graphics card to your computer.

When using the Virtual Reality (VR) headset, connect the HDMI cable to the graphics card installed on your Alienware Graphics

Amplifier. The USB cables from the VR headset can be connected either to your computer or your Alienware Graphics Amplifier.

NOTE: The USB dongle is not required, if you are connecting the USB 3.2 Gen 1 cables on your VR headset to the USB 3.2

Gen 1 Type-A port on your Alienware Graphics Amplifier.

For more information about Alienware Graphics Amplifier, see Alienware Graphics Amplifier User's Guide at www.dell.com/support.