Dell D19M Setup And Specifications Manual - Page 26

Browse online or download pdf Setup And Specifications Manual for Laptop Dell D19M. Dell D19M 34 pages.
Also for Dell D19M: Setup And Specifications (20 pages), Setup And Specifications (30 pages), Quick Start Manual (16 pages), Owner's Manual (37 pages), Owner's Manual (28 pages), Setup And Speci?Cations (27 pages), Setup And Specifications (18 pages), Setup And Specifications (15 pages), Setup And Specifications (17 pages), Manual (16 pages)

Print Page
Dell D19M Setup And Specifications Manual
Option
Description
•
•
•
Enable Intel Speed
This option is used to enable or disable the Intel speed shift technology support. The option is enabled by default.
Shift Technology
Auto On Time
Allows you to set the time at which the computer must turn on automatically. The options are:
•
•
•
•
Default setting: Disabled
Deep Sleep
Allows you to aggressive the system is at conserving power while Shut down (S5) or in Hybernate (S4) mode.
Control
•
•
•
USB Wake
Allows you to enable USB devices to wake the system from Standby.
Support
•
Default setting: The option is enabled..
Wake on LAN/
Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
WLAN
LAN signal.
•
•
•
•
•
Block Sleep
This option lets you block entering to sleep (S3 state) in operating system environment.
Block Sleep (S3 state)
Default setting: This option is disabled
Identifier
Status

POST Behavior screen options

GUID-F6F084AF-A5EC-4E9D-8424-BFBE9D56CEBE
Option
Description
Numlock LED
This option specifies whether the NumLock LED should be on when the system boots.
•
Keyboard Errors
This option option specifies whether the keyboard related errors are reported when it boots.
•
Fastboot
Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
•
26
System setup
Power Off (default)
Power On
Last Power State
Disabled
Every Day
Weekdays
Select Days
Disabled (default)
Enabled in S5 only
Enabled in S4 and S5
NOTE:
This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
Enable USB Wake Support
Disabled: This option is enabled by default.
LAN Only
WLAN Only
LAN or WLAN
LAN with PXE Boot
GUID-F6F084AF-A5EC-4E9D-8424-BFBE9D56CEBE
Released
Enable Numlock LED: The option is enabled.
Enables Keyboard Error Detection: The option is enabled by default.
Minimal