Avtech AVC791A Quick Start Manual - Page 2
Browse online or download pdf Quick Start Manual for DVR Avtech AVC791A. Avtech AVC791A 9 pages. Avtech avc791a h.264 network dvr
Print Page1. GUI DISPLAY WITH USB MOUSE CONTROL
1.1 Connect USB Mouse
Connect your USB mouse to one of the USB ports on the DVR front panel, and check if there's a mouse icon (
on the screen, indicating the USB mouse is detected properly.
Move your mouse to enter the DVR password with the password keypad. The default administrator password is
0000. The status will be changed from
the left side of the screen.
Note: There are two user levels for DVR access which can be set in the main menu "SYSTEM"
For details, please refer to your user manual.
Password Input
1.2 Quick Menu Bar
Move to the arrow mark to extend the quick menu bar and show the five functions as follows:
Quick Menu: Open
1.3 Main Menu
Right-click anywhere on the screen to show the main menu as follows, and right-click again to exit.
Main Menu
(key lock) to
Quick Menu: Close
QUICK START
DATE SETUP
SYSTEM
EVENT INFORMATION
ADVANCE CONFIG
SCHEDULE SETTING
(administrator), and the quick menu bar appears on
Click to show the channel switch panel and select the channel you want.
For details, please refer to "3.2 Quick Menu Bar" in the user manual.
Click to display the playback control panel, and click
recorded video clip, or click
Switch to the channel you want first, and click
mode. In this mode, click and drag the red frame on the bottom left of the
screen to move to the place you want to see. To exit this mode, click
Click to select the audio channel you want:
In the live mode, only the live audio channels can be selected.
In the playback mode, live and playback audio channels can be selected.
Click to enter the PTZ mode and show the PTZ camera control panel.
Click to set the status display, image settings, and date &
time.
Click to set the date display and daylight saving.
Click to set the system configurations.
Click to enter the event search menu.
Click to set CAMERA, DETECTION, ALERT,
NETWORK, SNTP, DISPLAY, RECORD and REMOTE.
Click to set record timer and detection timer.
1
to play the latest
to enter the search list.
to enter the zoom-in
)
"TOOLS".
.