Dell i1470-2932CRD - Inspiron 1470 Cherry Service Manual - Page 26

Browse online or download pdf Service Manual for Laptop Dell i1470-2932CRD - Inspiron 1470 Cherry. Dell i1470-2932CRD - Inspiron 1470 Cherry 46 pages. Service manual

Print Page

Back to Contents Page

Memory Module(s)

Dell™ Inspiron™ 1470/1570 Service Manual

Removing the Memory Module(s)

Replacing the Memory Module(s)

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on the back of the computer).

CAUTION:

To help prevent damage to the system board, remove the main battery (see

computer.

You can increase your computer memory by installing memory modules on the system board. See "Basic Specifications" in your Setup Guide and

"Comprehensive Specifications" on support.dell.com/manuals for information on the memory supported by your computer.

NOTE:

Memory modules purchased from Dell™ are covered under your computer warranty.

Your computer has two user-accessible SODIMM sockets, DIMM A and DIMM B, accessed from the bottom of the computer.

Removing the Memory Module(s)

1. Follow the procedures in

Before You

2. Remove the battery (see

Removing the

3. Remove the module cover (see

CAUTION:

To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips.

4. Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.

5. Remove the memory module from the memory module connector.

memory module connector

memory module

Replacing the Memory Module(s)

CAUTION:

If you need to install memory modules in two connectors, install a memory module in the connector labeled "DIMM A" before you

install a memory module in the connector labeled "DIMM B."

Begin.

Battery).

Removing the Module

Cover).

securing clips (2)

Removing the

Battery) before working inside the