DGT CUBE User Manual

Browse online or download pdf User Manual for Timer DGT CUBE. DGT CUBE 13 pages.
Also for DGT CUBE: User Manual (2 pages)

Print Page
DGT CUBE User Manual
EN
User manual
Content
1. Purpose
2. Game options
3. Use
4. Changing settings
5. Replacing the batteries
6. Warranty
7. Technical specifications
1. Purpose
The DGT Cube is a timer for (board) games with up to
6 players. The DGT Cube can provide a time limit for
the complete game (for each player) or for each
player's turn. This is shown on a separate display for
each player.
By applying time limits, playtime becomes easier to
control. Using the Cube provides an extra challenge in
playing various games.
Cube online
Visit www.dgtcube.com for game tips and discuss how
to use the Cube in your favorite games.
DGT CUBE
DGT Cube manual © Digital Game Technology 2010 - 2011
2. Game options
1. Game timer: Count down time per player for the
whole game.
2. Move timer: Count down time per player per
turn.
3. Move timer + save: Count down time per player
per turn. The remaining time (not used for that
turn) is saved for the next turn.
4. Up count: Count up time per player. Set the game
timer option to 0h 00m to activate.
5. Turn counter: Counts the number of turns/points
per player. Set the move-timer option to 0m 00s
to activate.
3. Use
Switch on & start
1. Press any
to switch the Cube on.
2. Each player chooses one side/color of the Cube.
3. Change settings on the red side (see changing
settings) or use the current settings.
4. When
is flashing, the Cube is ready to start.
5. Turn the side of the starting player upward and
press
to begin.
Changing turns
Change turns by rotating the side of the next player
upwards. This stops your timing and the next players
timing starts.
Stop the time
The time can be stopped by placing the Cube on its
base or by pressing
.
Pausing the Cube
Press
on two sides simultaneously to pause the
Cube. Now the Cube can be rotated to take a look at
all sides. Place the desired side upward and press
to resume the game.
Switch off
Press
on the upward side for 3 seconds to disable
the Cube. Doing this will terminate the game.
4. Changing settings
You can only change the settings immediately after
switching on the Cube. Use the buttons on the red
side to do this. You can leave the menu with the
current settings at any time by pressing
again to start the game.
. Press