Dell Inspiron 5491 Setup And Specifications Manual - Page 23
Browse online or download pdf Setup And Specifications Manual for Laptop Dell Inspiron 5491. Dell Inspiron 5491 33 pages. Solid state drive
Also for Dell Inspiron 5491: Setup And Specifications Manual (37 pages), Setup And Specifications (20 pages), Installation Manual (15 pages)
Print Page
Option
Description
USB PowerShare This field configures the USB PowerShare feature behavior. This option allows you to charge external
devices using the stored system battery power through the USB PowerShare port. The option "Enable
USB Power Share" is not enabled by default.
Audio
● Enable Microphone (default)
● Enable Internal Speaker (default)
Unobtrusive
This option, when enabled, pressing Fn+F7 turns off all light and sound emissions in the system. To
Mode
resume normal operation, press Fn+F7 again. This option is disabled by default.
Touchscreen
This fields controls whether the touchscreen is enabled or diabled.
● Touchscreen (enabled by default)
Miscellaneous
Allows you to enable or disable the following devices:
Devices
● Enable Camera: This option is enabled by default.
● Enable Hard Drive Free Fall Protection: This option is enabled by default.
● Enable Secure Digital (SD) Card: This option is enabled by default.
● Secure Digital (SD) Card Boot
● Secure Digital (SD) Card Read — only Mode
Video screen options
Option
Description
LCD Brightness
Allows you to set the display brightness depending up on the power source (On Battery and On AC).
NOTE:
The video setting will be visible only when a video card is installed into the system.
Security screen options
Option
Description
Admin Password
Allows you to set, change, or delete the administrator (admin) password.
Default setting: Not set
System
Allows you to set, change or delete the system password.
Password
Default setting: Not set
Internal HDD-0
Allows you to set, change, or delete the Internal HDD-0 password.
Password
Default setting: Not set
Strong Password Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
Password
Allows you to determine the minimum and maximum length of Administrator and System passwords.
Configuration
NOTE:
You must set the admin password before you set the system or hard drive password. Deleting
the admin password automatically deletes the system password and the hard drive password.
NOTE:
Successful password changes take effect immediately.
NOTE:
Successful password changes take effect immediately.
NOTE:
Successful password changes take effect immediately.
NOTE:
If Strong Password is enabled, Admin and System passwords must contain at least one
uppercase character, one lowercase character and be at least 8 characters long.
System setup options
23