Dell Inspiron 600m Service Manual - Page 39

Browse online or download pdf Service Manual for Laptop Dell Inspiron 600m. Dell Inspiron 600m 41 pages. Hard drive
Also for Dell Inspiron 600m: Start Here (2 pages), Start Here (2 pages), Start Here (2 pages), Getting Started Manual (2 pages), User Manual (34 pages), Setup Manual (2 pages), Getting Started (2 pages), Setup Manual (2 pages), Setup Manual (2 pages), Setup Manual (2 pages), Setup Manual (2 pages), Setup Manual (2 pages), Setup Manual (2 pages), Setup Manual (2 pages), Media Base User's Manual (26 pages), Service Manual (40 pages), Service Manual (41 pages), Installing And Configuring (38 pages), Quick Start (2 pages), Quick Start (2 pages), Quick Start (2 pages), Setting Up Your Computer (2 pages), Service Manual (41 pages), Service Manual (4 pages)

Print Page
Dell Inspiron 600m Service Manual
8.  Continue lowering the Mini PCI card until it snaps into the inner tabs of the connector.
9.  Replace the cover.
Modules
 Your computer ships with an optical drive installed in the module bay. However, the device security screw is not installed in the optical drive but packaged
separately. When you install your device in the module bay, you can install the device security screw.
 
NOTE:
You do not need to install the device security screw unless you want to secure the module inside the computer for security purposes.
If the Device Security Screw Is Not Installed
 
NOTICE:
To prevent damage to devices, place them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or
placing heavy objects on top of them.
1.  Press the device latch release so that the latch release pops out.
 
 
1
device latch release
2.  Pull the device by the latch release to remove the device from the module bay.
 
If the Device Security Screw Is Installed
1.  If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.
 
NOTICE:
To prevent damage to devices, place them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or
placing heavy objects on top of them.
2.  Close the display and turn the computer over.
3.  Use a #1 Phillips screwdriver to remove the M2 x 3-mm screw from the bottom of the computer.