Dell Inspiron 600m Service Manual - Page 9

Browse online or download pdf Service Manual for Laptop Dell Inspiron 600m. Dell Inspiron 600m 40 pages. Hard drive
Also for Dell Inspiron 600m: Start Here (2 pages), Start Here (2 pages), Start Here (2 pages), Getting Started Manual (2 pages), User Manual (34 pages), Setup Manual (2 pages), Getting Started (2 pages), Setup Manual (2 pages), Setup Manual (2 pages), Setup Manual (2 pages), Setup Manual (2 pages), Setup Manual (2 pages), Setup Manual (2 pages), Setup Manual (2 pages), Service Manual (41 pages), Media Base User's Manual (26 pages), Service Manual (41 pages), Installing And Configuring (38 pages), Quick Start (2 pages), Quick Start (2 pages), Quick Start (2 pages), Setting Up Your Computer (2 pages), Service Manual (41 pages), Service Manual (4 pages)

Print Page
Dell Inspiron 600m Service Manual
Back to Contents Page
  Hinge Cover and Display Module
Dell™ Inspiron™ 700m Service Manual 
  Removing the Hinge Cover
  Replacing the Hinge Cover
  Removing the Display Module
  Replacing the Display
 
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE:
Disconnect the computer and any attached devices from electrical outlets.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE:
Read
"Before Working Inside Your
 Removing the Hinge Cover
 
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
 
1. Remove the battery.
 
2. Open the display 180 degrees.
 
3. Use a plastic flat screwdriver to slide the hinge caps away from the computer.
 
4. Detach the two display latches on the back of the computer.
 
5. Use plastic flat screwdriver to carefully pry up the latches on either side of the hinge cover.
1 hinge cover tab
2 hinge cover
3 hinge cover
 
6. Carefully, lift the hinge cover from the main unit and remove it from the main unit.
 Replacing the Hinge Cover
 
1. Open the computer all the way (180 degrees) so that it lies flat against your work surface.
 
2. Connect the main cable.
Computer" before performing the following procedure.