Allied Telesis AR440S Release Note - Page 8
Browse online or download pdf Release Note for Network Hardware Allied Telesis AR440S. Allied Telesis AR440S 14 pages. 54266-02 patch release note
Print Page
8
AR441S ADSL Router Hardware Platform
Level 4
PCR: 40441
Module: IPG, VRRP
If VRRP was enabled and a reset ip command was issued followed by a
disable vrrp command, then the device would still reply to pings, even
though the device was no longer the VRRP master. Duplicate echo replies
were seen on the device sending the pings. This issue has been resolved.
Enhancements
PCR: 40521
Module: TACACS+
The new command show tacplus has been added. This command shows the
module status, number of servers, and number of logged in users.
PCR: 40677
Module: ADSL
The new ADSL Annex B firmware has been incorporated to allow
compliance with UR-2 specifications.
AR441S ADSL Router Hardware Platform
Patch 54266-01 includes support for the AR441S ADSL (Annex B) router.
Each AR441S router consists of a base CPU card, enclosure, and power supply.
The base CPU card supports:
■
One Asymmetric Digital Subscriber Line (ADSL) Annex B port.
■
Five 10/100 LAN switch ports.
■
One asynchronous RS-232 (ASYN0) port.
The PIC bay can accommodate any of the following PICs:
•
AT-AR020 PRI E1/T1 PIC, one Primary Rate E1/T1 port.
•
AT-AR021(S) BRI-S/T PIC, one Basic Rate ISDN S/T port.
•
AT-AR021(U) BRI-U PIC, one Basic Rate ISDN U port.
•
AT-AR022 ETH PIC, one Ethernet LAN AUI/10BASE-T port.
•
AT-AR023 SYN PIC, one Synchronous port with universal 50-way
AMPLIMITE connector.
•
AT-AR024 ASYN4 PIC, four Asynchronous ports with RJ-45
connectors.
•
AT-AR026 4ETH PIC, four 10BASE-T/100 BASE-TX auto-negotiating
ports with RJ-45 connectors.
•
AT-AR027 VoIP-FXS PIC, two Foreign Exchange Subscriber (FXS) ports
with RJ-11 connectors.
Patch Release Note
Level: 4
Patch 54266-02
C613-10417-00 Rev B