Avtech RMA-RE1-SEN Installation Note

Browse online or download pdf Installation Note for Accessories Avtech RMA-RE1-SEN. Avtech RMA-RE1-SEN 3 pages. Room entry sensor
Also for Avtech RMA-RE1-SEN: Installation Notes (3 pages)

Print Page

AVTECH

AVTECH's Room Entry Sensor monitors the open/closed state of

building doors, windows, cabinet doors, drawers, etc. This two-piece

sensor does not require a power supply and operates very simply. The

first piece has an embedded proximity switch which opens or closes

when the second piece, the magnet, is pulled away or pushed near.

By pairing the Room Entry Sensor with your Room Alert, you gain a

simple, reliable open/closed room entry status indicator.

Room Entry Sensor Package Contents

•

One (1) proximity switch with 11.81" leads

•

One (1) magnet

•

One (1) 25' speaker cable

Install Your Room Entry Sensor

Do not use this sensor in hazardous (classified) locations or life safety applications.

Step 1: Mount your Room Entry Sensor.

1. Position the proximity switch (the piece with wires) against the vertical or horizontal

edge of a door frame, window casing, etc.

2. Position the magnet (the piece without wires) on the edge

of the door or window so that when it closes, the magnet

closely abuts the proximity switch without actually touching it.

The two pieces may directly face one another or form a right

angle, as shown here, giving you more installation options.

3. Mount the two pieces securely with screws through their

flange holes, as shown here, or with an adhesive.

Step 2: Connect your Room Entry Sensor to Room Alert.

Do not connect the switch sensor inputs (dry contacts) on AVTECH products to any live

circuit.

Use only low-voltage 2-wire cable to connect switch sensor inputs.

Your Room Entry Sensor comes with a 25' speaker cable. Follow

these steps to attach one end of the speaker cable to the Room

Entry Sensor's leads, which are non-polarized, and the other end

to a switch port on your Room Alert:

1. Separate and strip the leads on one end of the included

speaker cable, exposing about ¼" of wire.

Room Entry Sensor

Temperature & Environment Monitoring... Made Easy!

Proximity Switch

Magnet

Leads