Craden DP8 Support Desk Manual - Page 7

Browse online or download pdf Support Desk Manual for Printer Accessories Craden DP8. Craden DP8 19 pages. Transaction printers
Also for Craden DP8: Technical Manual (8 pages), Installation Manual (2 pages), Supplementary Manual (18 pages)

Print Page

RIBBON SHIELD REMOVAL – REINSTALLATION

Open the cabinet, center the carriage and pull the

lifter ring out and down to raise the carriage. Remove

the ribbon cartridge.

Tabs

Pull the ribbon guide plate tabs toward you.

Insert the new shield tips into the gap

between the ribbon guide plate and the

carriage

Push the shield up until it stops.

Install the ribbon cartridge and

lower the carriage.

Watch the video at

www.craden.com/ribbonshield.wmv

Lifter

Ring

Carriage

Ribbon

Guide Plate

Shield

Tips

Carriage

Shaft

Lift the carriage shaft with one hand and

pull the shield down and out to the right

with the other.

Rotate the shield until it is centered on

the carriage. Do not let the shield tips

slip behind the carriage.

Move the carriage lifter ring up and in to lower

the carriage. Close the cabinet turn the printer

on and do a test print or transaction.