Dell Studio XPS 1340 Service Manual - Page 24

Browse online or download pdf Service Manual for Laptop Dell Studio XPS 1340. Dell Studio XPS 1340 40 pages.

Print Page
Back to Contents Page
  Status Light Board
Dell™ Studio XPS™ 1340 Service Manual 
  Removing the Status Light Board
  Replacing the Status Light Board
 
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
 
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface
(such as a connector on the back of the computer).
 
NOTICE:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is 
not covered by your warranty.
 
NOTICE:
To help prevent damage to the system board, remove the main battery (see
inside the computer.
 Removing the Status Light Board
 
1. Follow the instructions in
Before You
 
2. Remove the palm rest (see
 
3. Disconnect the status light board cable from the system board connector.
 
4. Remove the screw that secures the status light board to the computer base.
 
5. Lift the status light board off the computer.
1
system board cable connector
3
status light cable
 Replacing the Status Light Board
 
1. Place the status light board on the computer base.
 
2. Replace the screw that secures the status light board to the computer base.
 
3. Connect the status light cable to the system board connector.
 
4. Replace the palm rest (see
Back to Contents Page
 
Begin.
Removing the Palm
Rest).
2
screw
4
status light board
Replacing the Palm
Rest).
Before Working Inside Your
Computer) before working