DH electronics 96Boards Avenger96 Getting Started - Page 19

Browse online or download pdf Getting Started for Motherboard DH electronics 96Boards Avenger96. DH electronics 96Boards Avenger96 19 pages.
Also for DH electronics 96Boards Avenger96: Getting Started (14 pages)

Print Page

Avenger96 – Getting Started

DH electronics GmbH

1.3.8 SSH server

The pre-installed Linux automatically starts SSH server on all interfaces. One can connect to the board by exe-

cuting the following command on the PC (which has access to the same network as the Avenger96):

# ssh root@[IP address of board]

1.3.9 Debug UART

U-Boot and Linux boot logs as well as a standard Linux console is accessible on the debug UART connected to

pin 11 and 13 on the low-speed expansion connector (UART1 - see above). One can log into the Linux tty console

with the help of a USB-serial converter like this:

https://www.96boards.org/product/uartserial/

Any other USB-serial converter can be attached to the UART1 pins but care must be taken that signal levels are

1.8V CMOS.

1.3.10

Show Image Information

Show image infromation:

# cat /etc/issue

R03

DOC_Getting-Started-588-200.docx

Page 19 / 19