Dell D03T Manual - Page 11

Browse online or download pdf Manual for Desktop Dell D03T. Dell D03T 13 pages. Raid guide
Also for Dell D03T: Setup And Specifications (23 pages)

Print Page

7. Reboot the operating system and install the AMD RAIDXpert2 application from the AMD Chipset Device Software that is

downloaded previously.

8. Open the AMD RAIDXpert2 app from the Windows Start icon.

9. From the menu select Disk > Properties.

10. Select the required Disk.

The Disk properties are displayed.

NOTE:

If the Disk Write Back Caching and Disk Read Ahead are already enabled, skip steps 11 and 12.

11. In the Disk Write Back Caching, select Enable.

12. In the Disk Read Ahead, select Enable.

NOTE:

You must not use Shingled Magnetic Recording (SMR) Hard Disk Drives (HDDs). For redundant arrays, the

Create process starts after the operating system and RAID drivers are installed and the computer is booted to the

operating system. However, the arrays are immediately available for use as a boot array or data array. You must confirm

that the RAID Create process is completed for redundancy to be active.

Deleting the RAID volume

1. Press the F12 key to enter the One-Time Boot Settings menu.

2. Select Device Configuration.

The TPV EFI Device Manager pane appears.

3. From the Devices List, select RAIDXpert2 Configuration Utility.

4. On the Array Management pane, select Manage Array Properties.

5. Select Delete Array.

Ensure [X] is selected next to the Delete Array.

6. Select Check All.

7. Select Delete Array(s) .

Configuring RAID with AMD RAIDXpert2