Chris Coffee Service Vetrano Owner's Manual - Page 14

Browse online or download pdf Owner's Manual for Coffee Maker Chris Coffee Service Vetrano. Chris Coffee Service Vetrano 17 pages. Espresso machine

Print Page

Cleaning The Group

Before installing the new gasket and screen it is very important to clean the group head. Make

•

up a solution of hot water and backflushing cleanser. Using the provided cleaning brush and

cleanser, clean the group head and be sure the groove that the gasket sits in is completely

free of any residual gasket material and coffee grounds or the new gasket will not seat

properly.

Step 1

With the writing/beveled side of the gasket facing

up insert the screen into the gasket as shown to

the right.

It is also recommended to use a little bit of food

grade lubricant around the perimeter of the gasket

to make installation easier.

Step 2

Remove the insert basket from one of your

portafilters and then insert the screen and gasket

into the portafilter as shown to the right.

Step 3

With the gasket and screen in the portafilter, press

the portafilter into the group head. Apply equal

pressure on the portafilter so the gasket goes in

evenly. Once the gasket is up far enough then lock

the portafilter into the group head and turn as far

right as possible.

Then remove the portafilter and re-install the insert

basket and then work the gasket up furthur into the

grouphead using the portafilter with the basket

installed. If you are having trouble then remove the

portafilter and press the screen up furthur by hand

and then try using the portafilter again.

Vetrano

Chris' Coffee Service Inc.

- 14 -