Dell Dimension 2400 Series Rack Installation Instructions - Page 24

Browse online or download pdf Rack Installation Instructions for Server Dell Dimension 2400 Series. Dell Dimension 2400 Series 32 pages. Vga card installation instructions
Also for Dell Dimension 2400 Series: Quick Setup Manual (2 pages), Quick Setup Manual (2 pages), Installation Manual (20 pages), Install Manual (8 pages), Installation Instructions (1 pages), Manual (43 pages)

Print Page
Dell Dimension 2400 Series Rack Installation Instructions
1-12
Dell PowerEdge 2400 Systems Rack Installation Guide
plastic screws (4)
rubber feet (4)

Figure 1-10. Removing the Feet

3.
From the outside of the chassis, pry each foot from the chassis.
4.
Turn the computer over and lay it on the bottom side.
5.
Remove the front bezel and the left- and right-side computer covers.
See Chapter 7, "Checking Inside the Computer", in the computer's Installation
and Troubleshooting Guide for instructions on removing the bezel and computer
covers.
6.
Remove the two screws at the front edge of the top cover (see Figure 1-11).
(Retain the screws for later use.)
7 .
Slide the top cover about one-half of an inch toward the front of the computer,
and lift it away.
bottom of chassis