Dell E67S Reference Manual - Page 17
Browse online or download pdf Reference Manual for Server Dell E67S. Dell E67S 22 pages.
Print PageTable 19. System Profile Settings details (continued)
Option
Algorithm Performance
Boost Disable (ApbDis)
XGMI Max Speed
Dynamic Link Width
Management (DLWM)
System Security
To view the System Security screen, power on the system, press F2, and click System Setup Main Menu > System BIOS >
System Security.
Table 20. System Security details
Option
CPU AES-NI
System Password
Setup Password
Password Status
Table 21. TPM 1.2 security information
Option
Description
TPM Security
Enables you to control the reporting mode of the TPM. The TPM Security option is set to Off by
default. You can only modify the TPM Status, and TPM Activation if the TPM Status field is set to
either On with Pre-boot Measurements or On without Pre-boot Measurements.
When TPM 1.2 is installed, the TPM Security option is set to Off, On with Pre-boot Measurements,
or On without Pre-boot Measurements.
When TPM 2.0 is installed, the TPM Security option is set to On or Off. This option is set to Off by
default.
TPM Information
Changes the operational state of the TPM. This option is set to No Change by default.
TPM Firmware
Indicates the firmware version of the TPM.
TPM Status
Specifies the TPM status.
TPM Command
Controls the Trusted Platform Module (TPM). When set to None, no command is sent to the TPM.
When set to Activate, the TPM is enabled and activated. When set to Deactivate, the TPM is disabled
and deactivated. When set to Clear, all the contents of the TPM are cleared. This option is set to None
by default.
Table 22. TPM 2.0 security information
Option
Description
TPM Information
Changes the operational state of the TPM. This option is set to No Change by default.
TPM Firmware
Indicates the firmware version of the TPM.
TPM Hierarcy
Enables, disables, or clears the storage and endorsement hierarchies. When set to Enabled, the storage
and endorsement hierarchies can be used.
Description
Enables or disables the Algorithm Performance Boost Disable (ApbDis). This option is set to
Disabled by default.
This field specifies the processor's maximum XGMI speed.
Reduces the xGMI link width between sockets from x16 to x8 (default), when no traffic is
detected on the link. This option is set to Unforced by default.
Description
Improves the speed of applications by performing encryption and decryption by using
the Advanced Encryption Standard Instruction Set (AES-NI). This option is set to
Enabled by default.
Sets the system password. This option is set to Enabled by default and is read-only if
the password jumper is not installed in the system.
Sets the setup password. This option is read-only if the password jumper is not installed
in the system.
Locks the system password. This option is set to Unlocked by default.
NOTE:
The TPM menu is available only when the TPM module is installed.
Pre-operating system management applications
17